YOU HAVE ANY QUESTIONS? +49 (0) 9187 706 93 40

You have any questions? +49 (0) 9187 706 93 40


masetec solutions for mobility

Everything that causes movement runs even better with position sensors, level sensors or rotation sensors from masetec. If you do not find what you are looking for in our store, just let us produce your suitable solution.





Position / Switching

The magnet is built into the door, when the door opens, the switch opens and the light in the refrigerator goes on.


With the help of Reed or Hall sensors, the rotations are checked or queried in countless applications. Either it is about counting the number of rotations or in general to check if a rotation is taking place.

This includes applications such as speed measurement in e-bikes, bicycles or motorcycles as well as monitoring the rotation/revolution of a spray arm in a dishwasher.

Level 1

Removable tank
with float

Level 2

Fixed tank, side mounting
with level-side sensor

Level 3

Fixed tank
with Level-Top-Sensor

Contactless switching – activation of a smoke detector

The magnet is installed in the fixed component of the smoke detector. The smoke detector is activated by turning the housing in which the Reed switch is installed until the switch and magnet are above each other.

Vehicles in general

Sensor technology from masetec is used for example for level monitoring of all kinds of liquid tanks. Our sensor technology supports for example the position detection of door locks, glove compartments or brake pedals. Special sensors ensure the position detection of tank caps or safety belts. masetec sensors can also be used in limit switches for the window position. Among others, sensors of the MMS-1, MMS-2 and MMS-4 series are used.

E-bikes/scooters and motorcycles

Sensor technology for rotation detection of masetec is suitable for measuring the number of revolutions of the wheels (for speed determination). Position sensors enable the detection of the stand, e.g. tubular sensors of the MMS-2 series are used.

Reed sensors - Flange

Here you can find an overview of masetec Reed sensors of the Flange MMS-1 series.

Reed sensors – Tubular​

Here you can find an overview of masetec Reed sensors of the Tubular MMS-2 series.

Reed sensors – THT

Here you find an overview of masetec Reed sensors of the THT MMS-4 series.

Discover your opportunities.

Visit our store and get an insight into our offer.


Do you want an individual solution?

Your application is not included?
No problem: We develop the appropriate solution.

I will gladly answer your questions

Your contact person
Morris Wilisch
General Manager

Position / Schalten

Der Magnet ist in der Tür verbaut, wenn die Türe aufgeht, öffnet der Schalter und das Licht im Kühlschrank geht an.

Rotation / Anzahl Umdrehungen / Geschwindigkeit

Rotation: Mithilfe der Reedsensoren werden bei Autos z.B. folgende Dinge gemessen:
Drehzahl, Position Cabriodach, Füllstand Spritzwasser

Bei Fahrrädern / Motorrädern:
Geschwindigkeit, gefahrene Kilometer etc.

Niveau 1

herausnehmbarer Tank mit Schwimmer

Niveau 2

fester Tank, seitliche Montage mit Level-Side-Sensor

Niveau 3

fester Tank mit Level-Top-Sensor

Berührungslos Schalten Aktivierung eines Rauchmelders

Der Magnet ist in dem festen Bauteil des Rauchmelders verbaut. Dreht man die hellgraue Scheibe mit dem Reedschalter bis Schalter und Magnet übereinander stehen, ist der Rauchmelder aktiviert wird das rote Licht grün und der Rauchmelder aktiv.